The "Eisbecher" DDC
The "Eisbecher" for the Laing DDC pump leaves no possibilities unexplored. The pump is easily attached to the underside with four screws. For the best overall appearance, Alphacool recommends using the metal bottom for the Laing DDC. For the plexiglass version, there are two 5mm holes for LEDs as well as a lighting module in the cap for illumination from above. Small standpipes and Bubble Down also do their work faultlessly here. The "Eisbecher" can be mounted either with the mounting bracket or with the included stands. If there is room in the 3.5" hard drive cage inside the case, the pump socket also has threads for this (requires pump decoupling with M4 inner and outer threads - Art. 52007).
Dimensions for 250mm Version:
- Measurements incl. bracket and stands (LxWxD): 304 x 136 x 88mm
- Measurements without bracket incl. stands (LxWxD): 304 x 87 x 88mm
- Plexiglass tube diameter: 60mm
- Capacity: 360ml
To use the inlet from the top you will need a G1/4" extension piece (Art. 1011183-1011186), as the thread is set into the lid a few mm and many nozzles will not screw in properly.
Pump: Alphacool Laing DDC310 - Single Edition - black
- Dimensions: 61 x 60 x 21mm
- Colour: Black nickel, black
- Power input: 10W
- Material: brass, stainless steel, aluminium oxide, hard carbon
- Maximum head: 2.44m
- Maximum system temperature: 60°C
- Maximum flow rate: 200L/h
- Voltage: 12V DC
- Electrical connection: 4 pin Molex
- RPM signal: 3 pin Molex
Scope of Delivery:
- 1x Alphacool Eisbecher DDC 250mm Acetal incl. 1x Alphacool DDC310
Attention: The manufacturer Mayhems advises that Mayhems fluids, especially the Aurora line of products, have been manufactured and distributed solely for show and modding purposes. These should not be utilized in the system for more than 14 days.
We would also like to advise that Mayhems fluids can damage water cooling products, and using Mayhems fluids can thereby void the warranties offered by the following manufacturers: Koolance, Phobya, Alphacool, Aqua Computer, Watercool.
Damages such as: clogging, corrosion of aluminium radiators, deterioration of glued containers, etc., are a consequence of the use of Mayhems, but will not be reimbursed by Mayhems. Use is therefore at one’s own risk.
|Connector:||G1/4" inner thread|
|Fillport:||G1/4" inner thread|
|LED hole:||Not available|
|Model of reservoir:||Tubing - reservoirs 60mm|
|Pump compatibility:||For Laing DDC|
|Number of connections:||4|
Click here to display this question (s).
Click here to show.
Mit Farbiger Kühlflüssigkeit macht der Eisbecker richtig was her mit dem Aurora Ring. Ich hab mir jetzt noch LEDs dazu geholt und es sieht super aus. Sogar die Pumpe ist stark genug für meine CPU WaKü mit einem 480 Radiator und GPU.