- Article no.: 52034
- Manufacturer no.: 13905
- EAN: 4250197139052
- Weight: 0,212 kg
Delivery time: 30 - 60 days
Prices incl. VAT plus shipping costs
The ideal addition for the reservoir for the Laing DDC pump.
This reservoir is designed for the Laing DDC Plexi top. It allows expansion of e.g. a Laing Pro or Laing Ultra with a directly attached reservoir.
Dimensions (LxWxH): 80x80x40mm (without fittings or pump)
Material: Röhm Plexiglas GS
This reservoir is not compatible with tops from Watercool, XSPC, Zern or OC-Labs.
Please note: The 4 screws which fixate the reservoir must be tightened only hand-tight (0.4 Nm). A small gap will remain between the reservoir and pump top, this is normal and does not affect the seal of the connection. Over-tightening the screws can damage the Laing top!
Attention: The manufacturer Mayhems advises that Mayhems fluids, especially the Aurora line of products, have been manufactured and distributed solely for show and modding purposes. These should not be utilized in the system for more than 14 days.
We would also like to advise that Mayhems fluids can damage water cooling products, and using Mayhems fluids can thereby void the warranties offered by the following manufacturers: Koolance, Phobya, Alphacool, Aqua Computer, Watercool.
Damages such as: clogging, corrosion of aluminium radiators, deterioration of glued containers, etc., are a consequence of the use of Mayhems, but will not be reimbursed by Mayhems. Use is therefore at one’s own risk.
|Connector:||G1/4" inner thread|
|Fillport:||G1/4" inner thread|
|LED hole:||Available (for 5mm LEDs)|