Your watercooling and modding distributor Your watercooling and modding distributor

Alphacool Eisstation VPP reservoir incl. Alphacool Eispumpe VPP755 V.3 pump

  • 1012971
  • 13295
  • 4250197132954
  • 1,5 kg

> 25 ready for shipment, delivery time 1-3 days

$73.48 *

Prices incl. VAT plus shipping costs

With the Alphacool Eisstation, you get a compact reservoir that fits into nearly any case. It... more
Product Information

With the Alphacool Eisstation, you get a compact reservoir that fits into nearly any case. It comes in three different versions. A DDC, a D5, and a DC-LT version are available.


  1. The cap is made of sturdy Nylon
  2. Three versions for all current pumps
  3. Numerous mounting options
  4. Illuminated logo and LED mounting options

The Alphacool Eisstation reservoir is extremely compact and is available in three versions suited for different pumps. D5, DDC and DC-LT versions are available. Each pump is installed in the bottom of the Eisstation and is not visible from the outside. The bottom of the Eisstation is a metal plate that reduces vibrations and increases the stability of the Eisstation.

Mounting possibilities
The installation options are numerous and comprehensive. The Eisstation can be screwed onto a 2.5” SSD bracket. It can also be mounted in a 3,5” bay. In either case, the special decoupling screws included with the Eisstation are used for mounting it. This minimises the transfer of vibrations to the case, lowering the operating volume significantly. Another installation option is the included Velcro fastener. One part of the Velcro is glued to the bottom of the Eisstation, while the other part is glued to the case. Then all that’s left is to press the Eisstation’s bottom against the corresponding Velcro on the case. The size of the Velcro ensures secure positioning even during transport. 
The Eisstation can be mounted vertically or horizontally, depending on personal taste and available space.

Connection possibilities
There are four possibilities for connection. An IN and an OUT with G1/4 threads are located on the top, with the illuminated logo. The logo’s colour can be changed with the optional modding kit. In the cap, there is one G1/4” and one G3/8” connection available. The G3/8” connection, with its larger size, simplifies filling the Eisstation and can also serve as a lighting module for 5mm LEDs. Two additional 5mm LED places can be found in the bottom of the reservoir and illuminate the water-filled portion from below.

A highlight of the Eisstation is the materials it is composed of. The bottom portion has a high-quality soft-touch surface which gives it an outstanding look and feel. The upper portion and the reservoir itself are not made of simple, easily breakable Plexiglas, but rather of extremely sturdy Nylon. While normal reservoirs made of glass or Plexiglas can break or crack due to falls, even from a small height, or due to improper handling, it is nearly impossible to damage the Eisstation’s clear container.

Technical Details Eisstation

  • Dimensions (LxWxH): 102 x 82 x 105mm
  • Capacity: 250ml
  • Material: Nylon / PMMA
  • In / Out: G1/4"
  • Connections: 3x G1/4" and 1x G3/8"
  • Power connection LED Logo: 3 Pin
  • Lighting modules: 4x for 5mm LED's

Technical Details Eispumpe VPP755 V.3

  • PWM controlled pump
  • Connection: 4Pin PWM / 4Pin Molex
  • Start Boost Function
  • Self-venting
  • Improved Software
  • New bearing for the ceramic axis
  • 5 adjustable steps
    • 1. 2100 rpm 120l/h
    • 2. 2700 rpm 140l/h
    • 3. 3330 rpm 280l/h
    • 4. 3950 rpm 320l/h
    • 5. 4350 rpm 340l/h
  • Maximum Head Pressure: 4.25m

Scope of Delivery

  • 1x Alphacool Eisstation VPP reservoir incl. Alphacool Eispumpe VPP755 V.3 pump
  • 1x Metal bottom
  • pump bracket
  • Mounting screws
  • 4x Decoupling screws
  • Self-adhesive velcro



Mounting manual

Download 3D-file (.stp)


Removing the impeller from the ceramic shaft will cause the upper ceramic clamping ring to over-expand, which will destroy it! Removal will void the pump’s warranty!

If the pump is put together again and put back into operation, the clamping ring will loosen, which is not accepted as grounds for a return or exchange...


Attention: The manufacturer Mayhems advises that Mayhems fluids, especially the Aurora line of products, have been manufactured and distributed solely for show and modding purposes. These should not be utilized in the system for more than 14 days.

We would also like to advise that Mayhems fluids can damage water cooling products, and using Mayhems fluids can thereby void the warranties offered by the following manufacturers: Koolance, Phobya, Alphacool, Aqua Computer, Watercool.

Damages such as: clogging, corrosion of aluminium radiators, deterioration of glued containers, etc., are a consequence of the use of Mayhems, but will not be reimbursed by Mayhems. Use is therefore at one’s own risk.

Awards and documents
Technical details and videos ... moor
Technical details
Color: black
Manufacturer: Alphacool
Connector: G1/4" inner thread
Fillport: G1/4" inner thread
LED hole: Not available
Pump compatibility: For 1x D5
Material: POM
Model of reservoir: Tower tank
Number of connections: 4
Preinstalled pump: Yes
Questions & Answers more
Questions & Answers
Question from Mark R. from 10. October 2018
Can this be used with an Alphacool Eisbaer 360mm rad and CPU block, 280mm rad, and up to two Eiswolf GPX Pro M20 (for a 1080Ti)? I would like to enhance the overall flow of my cooling setup without the rads bursting or the pumps working against each other.
Antwort von Aquatuning GmbH vom 10. October 2018
Basicly yes, you can. You already have 3 LT pumps in the loop, so if you want to add the D5 Pump, you should use only step 1 or max. 2, because the D5 pump has more power then the LT.
Antwort von Mark R. vom 01. January 2019
Another question. I was planning on just unplugging the three LT pumps (saving them for later in the event of a failure with this pump) and using this pump. Would I be able to safely use a higher level of pumping without all four going at once? like maybe step three or four?
4 Question (s) in other languages.
Click here to display this question (s).
Question from pascal p. from 02. February 2018
Guten Tag Mich würde intressieren ob ich die Pumpe auch per Pwm signal regeln läst oder geht das nur Manuel ?? Mfg
Antwort von Aquatuning GmbH vom 02. February 2018
Die Vpp755 lässt sich auch über ein entsprechende PWM Signal steuern.
Question from Guest #67857 from 02. February 2018
Hallo, mich würde gerne wissen wieviel Kühlflüssigkeit in den AGB der Eisstation passt.
Antwort von Aquatuning GmbH vom 02. February 2018
In der Produktbeschreibung finden sie die Angabe: 250ml
Question from Sandro K. from 07. July 2018
Guten Tag, ich höre bei der Pumpe ein deutliches brummen/surren bei höherer Drehzahl. Ich steuer die Pumpe via PWM und der Regler der Pumpe ist auf max. Ist das ein Fall für RMA? Ist der Widerstand bei 3x 360er Radiatoren + CPU + GPU Kühler evtl. zu hoch?
Antwort von Sandro K. vom 07. July 2018
Das Problem war, das die Halteschrauben der Pumpe zu fest angezogen waren. Habe sie um 1/4 Umdrehung gelockert. Damit ist die Pumpe wieder super leise. Dieser Hinweis sollte auch hier eingetragen werden und nicht nur bei die VPP755 Single Variante.
Question from Guest #238890 from 03. March 2019
Hallo, Ich möchte meine Eisstation gerne liegend betreiben und habe dazu einige Fragen. 1. Gibt es beim horizontalen Betrieb etwas grundsätzliches zu beachten? 2. Ist eine der Seiten bevorzugt oben oder unten zu montieren? 3. Wie wird die Pumpe idealerweise (liegend) montiert, vor allem in Bezug auf die Entkopplung. 4. sollte sich die liegende Montage in meinem Fall doch als ungünstig heraus stellen - gibt es Halterungen für die Montage an Frontlüftern/-radiatoren?
Antwort von Aquatuning GmbH vom 03. March 2019
Hallo, da dies eine sehr komplexe Frage ist, würde ich Sie bitten eine Email an zu schreiben, da es hier in diesem Frage und Antwort Tool ungüstig ist, wenn hier ein langer Chatverlauf entsteht.
Read, write and discuss reviews... more
5 Stars:
4 Stars:
3 Stars:
2 Stars:
1 Stars:
30 May 2018

I have learned a lesson:
Do not use Mayhems Pastel with this pump.

What Alphacool explained me is that the axis is made of somehow similar ingedients as there are in Mayhems Pastel, so this reacts with the fluid, and parts of the fluid will stuck to the axis and finally ruin the pump.

I have heard a lot of people getting angry about the pump. Guys, it is the fluid! So I wonder why Mayhems sells this kind of garbage fluids?

16 Jan 2018

The Alphacool Eisstation is indestructible- I really enjoyed the video.
So when I hold it in my hands I was sure that this was the perfect choice for me.
The Eisstation even feels great, is solid and looks good.
Plus: I can mount 2 LEDs in the inside.
Whan an amazing Computer liquid cooling reservoir

16 Jan 2018

The Alphacool Eisstation is a very useful pump reservoir combination.
It looks great and is undestroyable! Please everyone watch the video!

7 Dec 2017

perfect reservoir. I really laughed when i saw the video.

4 evaluation(s) in other languages.
Click here to show.
Alphacool tubing AlphaTube HF 13/10 (3/8"ID) - clear 3m (9,8ft) Retailbox Alphacool tubing AlphaTube HF 13/10 (3/8"ID) -...
Content 300 cm ($3.66 * / 100 cm)
$10.98 *
Alphacool CKC Cape Kelvin Catcher Clear Kanister 3000ml Alphacool CKC Cape Kelvin Catcher Clear...
Content 3000 ml ($7.75 * / 1000 ml)
$23.26 *