- Article no.: 1011327
- Manufacturer no.: 13187
- EAN: 4250197131872
- Weight: 0,271 kg
> 50 ready for shipment, delivery time 1-3 days
Prices incl. VAT plus shipping costs
Space saving, simple, practical and manifold describes this outstanding product.
A simple mounting on the essays for the Laing DDC and the Laing D5 or VPP655 make this reservoir an integral part of water cooling. Due to the compact design the combination of the ice sheets series is well suited for small cases but also Powerful for large water cooling systems.
Mounting is very simple with four screws on the optional "Eisdecken". An O-ring seals and the container can then be integrated into the system.
- Dimensions (LxWxH): 80 x 80 x 45mm
- Water capacity: max. 123ml
- Material: Acrylic
- Thread: 1x 1/4“
Scope of delivery:
- 1x Alphacool Eisdecke DDC/D5 Reservoir
- 1x Bubble Down
- 1x Allen key
Notice: The 4 screws holding the container is mounted must only be tightened finger-tight (0,4Nm). There remains a small gap between the container and the pump cover. Excessive tightening may damage the cap and reservoir.
Attention: The manufacturer Mayhems advises that Mayhems fluids, especially the Aurora line of products, have been manufactured and distributed solely for show and modding purposes. These should not be utilized in the system for more than 14 days.
We would also like to advise that Mayhems fluids can damage water cooling products, and using Mayhems fluids can thereby void the warranties offered by the following manufacturers: Koolance, Phobya, Alphacool, Aqua Computer, Watercool.
Damages such as: clogging, corrosion of aluminium radiators, deterioration of glued containers, etc., are a consequence of the use of Mayhems, but will not be reimbursed by Mayhems. Use is therefore at one’s own risk.
|Pump compatibility:||For flow pumps|
|Connector:||G1/4" inner thread|
|LED hole:||Not available|
|Number of connections:||1|
|Model of reservoir:||Tower tank|
|Dimensions:||80 x 80 x 45mm|
Click here to display this question (s).