Alphacool's new Low Noise Edition of the Laing DDC for absolute silence!
The Laing DDC pump is one of the best known pumps in the watercooling industry. Recently we have been working with Laing to take the DDC to the next level. The new Laing DDC310 was designed with a perfect balance of power and silence in mind. Unlike other versions with the plastic base we have revised the design with new superbly tuned brass housing which aids the pumps cooling and guarantees longer life especially when placed in areas with limited airflow.
This new housing promises a longer life of the pump. Through the cooling fins and air flow as well as an internal thermal pad attached directly to the pump board maximum cooling is achieved.
Another feature is the included decoupling option. If a pump top with a M4 threaded mounting hole, such as the Alphacool Laing DDC Acetal top is present. The special M4 screws can be screwed directly into the decoupling set and then into the case.
The pump also comes as standard with an anti-vibration mounting system . Available in black nickel and silver nickel.
This pump should be the first choice for your watercooling system.
|Dimensions (L x W x H)||62 x 62 x 30mm|
|Material||Stainless steel, Carbon (FH821Z2), Ceramic (Al2O3 99,5%), Luranyl KR 2403 GW T4 (PPE+PS) , Fortron 1140L4 (PPS)|
|Max power consumption||8W|
|Power connector||4-Pin Molex|
|Tacho-Signal||yes (3-Pin Molex)|
|Max. working temperature ambiente||10°C - 50°C|
|Max. working temperature water||10°C - 60°C|
|Max. head of pump||2,28m|
|Max. flow||200 L/h|
|Max. pressure [bar]||1,5|
Note on application
Please use only in conjunction with clear transparent water cooling fluids. The particles and additives in Pastel liquids can clog and permanently damage water cooling products such as radiators, pumps, coolers and hoses. This can result in voiding the manufacturer's warranty as well.
|Water outlet:||Not available|
|Dimensions:||62 x 62 x 30mm|
|Max. Discharge head:||2,28m, Good (2 to 4m)|
|Max. Flow:||200 l/h, Standard (kleiner 500 l/h)|
|Max. System temperature:||60°C|
|Water inlet:||Not available|
|Material:||Brass, Hartcoal, Aluminiumoxid|
|Power connector:||4Pin Molex|
|Approved fluids:||Water, Water/ glycol mixture|
Click here to display this question (s).