The Eisbecher D5
This Eisbecher is the big brother of the D5 version. The pump can be attached using a mounting ring and eight screws to hold it. The plexiglass version can be illuminated with four LEDs, which are placed into the pump socket. The lighting module illuminates from above. Small riser pipes and Bubble Down also do their work faultlessly here. The Eisbecher can be mounted either with the mounting bracket or with the included stands. If there is room in the 3.5" hard drive cage inside the case, the pump socket also has threads for this (requires pump decoupling with M4 inner and outer threads - Art. no. 52007).
Scope of Delivery
- 8x M4x12mm screws
- 8x M4x8mm screws
- 4x M4 nuts
- 1x mounting ring
- 1x O-ring ID ca. 54mm
- 2x stands
- 1x 2.5mm hex key
Dimensions for 250mm version
- Dimensions incl. bracket without stands (LxWxH): 277.5 x 136 x 80mm
- Dimensions without bracket incl. stands (LxWxH): 324 x 87.5 x 80mm
- Plexiglass tube diameter: 60mm
- Capacity: 360ml
The Alphacool Eispumpe VPP755 V.3
The Alphacool Eispumpe VPP755 V.3 improves on the classic D5 VPP655 pump in every way. There is no area where it is weaker or louder than its predecessor, and it instead offers new ways to control the pump to your liking.
- Bomba controlada PWM
- Conexión: 4Pin PWM / 4Pin Molex
- Función de arranque
- Software mejorado
- Nuevo rodamiento de los ejes cerámicos.
- 5 niveles ajustables
- 1. 2100 rpm 120l / h
- 2. 2700 rpm 140l / h
- 3. 3330 rpm 280l / h
- 4. 3950 rpm 320l / h
- 5. 4350 rpm 340l / h
- Columna de agua máxima: 4.25m
Scope of Delivery
- Alphacool Eisbecher D5 250mm Acetal incl. 1x Alphacool Eispumpe VPP755 V.3
In order to use the inlet from above, a G1/4" extension piece is required (art. no. 1011183-1011186), as the thread is embedded a few mm into the cap and many screw threads will not be able to reach it.
Removing the impeller from the ceramic shaft will cause the upper ceramic clamping ring to over-expand, which will destroy it! Removal will void the pump’s warranty!
If the pump is put together again and put back into operation, the clamping ring will loosen, which is not accepted as grounds for a return or exchange...
Attention: The manufacturer Mayhems advises that Mayhems fluids, especially the Aurora line of products, have been manufactured and distributed solely for show and modding purposes. These should not be utilized in the system for more than 14 days.
We would also like to advise that Mayhems fluids can damage water cooling products, and using Mayhems fluids can thereby void the warranties offered by the following manufacturers: Koolance, Phobya, Alphacool, Aqua Computer, Watercool.
Damages such as: clogging, corrosion of aluminium radiators, deterioration of glued containers, etc., are a consequence of the use of Mayhems, but will not be reimbursed by Mayhems. Use is therefore at one’s own risk.
|Approved fluids:||Water, Water/ glycol mixture|
|Water inlet:||G1/4" inner thread|
|Water outlet:||G1/4" inner thread|
Click here to display this question (s).
I bought my water cooling before I saw this. So this is outstanding! I like the performance of the pump and the classic design.
For my next computer this should be the first choice.
Here I see the best pump ever now even with a reservoir. Excellent!
THis is my favourite reservoir. I like the quality and the way the pump is mounted. Looks very professional and massive.
Not to mention the crazy pump power that really makes a great effect in the tube.
Click here to show.
Diese vorinstallierten Produkte sind echt super. Man erspart sich das zusammen bauen. Die Eispumpe hat eine echt gute Leistung uns sieht sehr edel aus. Würde vorinstallierte Produkte immer wieder gerne weiter empfehlen.
Die Eispumpe D5 ist eine Knallerpumpe mit Knallerleistung und das zu dem Preis!!
Die perfekteste Kombi - Pumpe hat ordentlich Leistung bei geringer Geräuschentwicklung. Der Behälter lässt sich sehr schön individualisieren.
Ich stehe auf vormontierte Produkte wo mann selber alles sofort einsatzbereit hat. Der Preis ist toll!