- Article no.: 1010955
- Manufacturer no.: 13173
- EAN: 4250197131735
- Weight: 0,5 kg
Delivery time: 30 - 60 days
Prices incl. VAT plus shipping costs
Alphacool's new power pump series, exceptional performance at an unbeatable price. The 12V pumps can simply be connected directly to the system PSU and the pump will start with your PC for maximum convenience and safety.
This pump is ideal for PC and other electronics water cooling. The DC pump is equipped with an electronically commutated spherical motor. In a pump with a spherical motor the only moving part is a spherically shaped rotor which in this pump is held in place by a bearing ball made of ultra-hard and wear-resistant ceramic. The spherical bearing of the rotor offers many advantages: For example an increase of bearing play is impossible due to the design, allowing the pump to run quietly and smoothly over its whole lifespan. A separate magnetic shielding of the pump is not needed.
The ball motor design allows efficient operation of the pump in combination with excellent performance. The pump can simply be connected to a 12V Molex connector of the system PSU.
Coupled with a Alphacool VPP655 PWM the V2 cover provides more flow and reduces the operating noise significantly. If the immense power is not needed, then the pump can be easily regulated via PWM signal.
Dimensions (WxHxD): 95 x 45 x 80mm mm (without connectors)
Connection threads: 4x G1 / 4
Motor: Electronically commuted spherical motor
Rated voltage: 12V DC
Power consumption: 23W
Permitted voltage range: 8-24V DC
Pressure head at 12V: 3,7m
Maximum flow: 1500l/h
Pumped media: Water, water/glycol mixtures
Maximum system temperature: 60°C
Materials: Stainless steel 1.4571, PPS-GF40, EPDM O-rings, Aluminium oxide, hard coal
Power connector: 4 Pin Molex
Extent of delivery:
1x Alphacool VPP655 - PWM - G1/4 IG incl. Top
Datasheet D5 Pump VPP655
Attention: The manufacturer Mayhems advises that Mayhems fluids, especially the Aurora line of products, have been manufactured and distributed solely for show and modding purposes. These should not be utilized in the system for more than 14 days.
We would also like to advise that Mayhems fluids can damage water cooling products, and using Mayhems fluids can thereby void the warranties offered by the following manufacturers: Koolance, Phobya, Alphacool, Aqua Computer, Watercool.
Damages such as: clogging, corrosion of aluminium radiators, deterioration of glued containers, etc., are a consequence of the use of Mayhems, but will not be reimbursed by Mayhems. Use is therefore at one’s own risk.
|Water outlet:||G1/4" inner thread|
|Dimensions:||95 x 45 x 80mm|
|Max. Flow:||1500l/h, Extreme (more than 1400l/h)|
|Max. Discharge head:||3,7m, Good (2 to 4m)|
|Water inlet:||G1/4" inner thread|
|Power connector:||4Pin Molex, 4Pin PWM|
|Max. System temperature:||60° C|
|Approved fluids:||Water, Water/ glycol mixture|
|Others:||Incl. Acetal coupling|
|Possible control range:||8-24V DC|
Click here to display this question (s).