- Article no.: 1012657
- Manufacturer no.: 11448
- EAN: 4251312601201
- Weight: 0,52 kg
Delivery: in 3 - 4 weeks
Prices incl. VAT plus shipping costs
Water blocks from the HEATKILLER® MB-X series are focused on performance. They are designed for the specific mainboard and therefore, they are not modular like products of our HEATKILLER® SW-X series. On the plus side, they offer superior cooling performance for the demanding customer while producing very little restriction (High Flow). The water block enhances the mechanical stability of the mainboard while granting superior overclocking potential.
Another key feature of the HEATKILLER® MB-X series are isolating spacers. They isolate the water block from the mainboard electrically, while granting easy mounting. Tilting or wobbling of the water block are also ruled out by them.
Only high grade materials are used for the HEATKILLER® MB-X series. The cold plate is made from 99,9% pure electrolytic copper. The top is made from high quality industrial plastic. You can choose between black ACETAL (POM) or transparent ACRYL (original PLEXIGLAS).
To illuminate the water block, there also is a 3mm drill hole for LEDs.
Integration in the water loop is provided via two G1/4 threads. Pre cut thermal pads are within the scope of deliver, as is the mounting material. No additional thermal compound is needed.
- Material: Nickel plated electrolytic copper, PLEXIGLAS, stainless steel
- Dimensions: (L x W x H): 126 x 116 x 23,5 mm
- Weight: ca. 150g
- Pressure tested: 2 bar
- Sealing: NBR70
- Threads: G1/4 inch (DIN ISO 228-1)
- 1x HEATKILLER® MB-X KIT ASUS MAXIMUS VIII RANGER/HERO/GENE - ACRYL Ni
- 1x Mounting kit
- 1x thermal pads
- 1x Manual
|Cooling plate material:||Copper plated|
|Cooler model:||Mainboard Cooler|
|Hardware model:||ASUS Maximus VIII|
|Top cover material:||Acryl|
Click here to display this question (s).