Your watercooling and modding distributor Your watercooling and modding distributor

Alphacool Eiswolf 240 GPX Pro Nvidia Geforce RTX 2080Ti Strix M12 - Black

  • 1017314
  • 11744
  • 4250197117449
  • 3,633 kg

> 5 ready for shipment, delivery time 1-3 days

$199.36 *

Prices incl. VAT plus shipping costs

Recommended accessories
Additional charge
Alphacool Eiszapfen 13/10mm compression fitting G1/4 - chrome sixpack
1x
Alphacool Eiszapfen 13/10mm compression fitting G1/4 - chrome sixpack
$31.40*
Alphacool Eisbaer 240 CPU - black
1x
Alphacool Eisbaer 240 CPU - black
$104.93*
Alphacool Eisbaer GPX Extension Set 90° (tubes and fittings)
1x
Alphacool Eisbaer GPX Extension Set 90° (tubes and fittings)
$13.23*
Alphacool NexXxos Eiswolf / Eisbaer Ready ST30 Full Copper 240mm radiator
1x
Alphacool NexXxos Eiswolf / Eisbaer Ready ST30 Full Copper 240mm radiator
$72.46*
Alphacool Eisbaer (Solo) - 2600rpm - chrome
1x
Alphacool Eisbaer (Solo) - 2600rpm - chrome
$57.55*
Alphacool is an internationally renowned company in the field of water cooling solutions for... more
Product Information

Alphacool is an internationally renowned company in the field of water cooling solutions for industrial and end users. Developing new innovative products and always improving existing products ensures that Alphacool are always pushing the boundaries for performance for home, server and industrial use

The first real AiO for graphics cards
The Eiswolf GPX-Pro cooler is the first real AiO that was developed specially for cooling graphics cards. Previous solutions were usually hybrid solutions, consisting of an AiO CPU cooler and an adapted cooling block including additional air cooling. The NexXxoS GPX cooler serves as the foundation for the Eiswolf GPX Pro however, various improvements have been made to the cooling block. These have significantly increased the cooling performance of the voltage converters. The cooling block and pump have also been optimized for the large die of the GPUs and also the HBM . In addition, each Eiswolf GPX-Pro cooler comes with a backplate that is in direct contact with the actual cooler. This offers two advantages. On the one hand, the heat can be better dissipated from the back, on the other hand, the PCB of the graphics card is completely covered making it look far nicer.

Powerful Silent Pump
The Alphacool DC-LT pump has been continuously developed and optimised for years. The DC-LT is used in various AiO coolers for CPUs and GPUs and even in the classic DiY range. The pump is particularly popular for building compact loops where space is at a minimum. Despite its extremely compact dimensions, it offers high performance with head pressure of 0.85 m. This is enough to power a small cooling circuit even if other components are integrated into the circuit. The pump is almost silent thanks to the new suction principle, flow noise and vibrations are minimized.

Expandability
The Eiswolf GPX-Pro cooler is an Eisbaer Ready product. This means that the Eisbaer cooler can easily be connected to other components via the pre-assembled quick coupling. For example, If you already have an Eisbaer CPU AiO cooler, you will be able to connect the Eiswolf GPX-Pro and have a single loop. You can also connect it to a custom loop with the quick disconnects too! It is no problem if a more powerful pump is already used in the DIY water circuit. For better compatibility, all connections, hoses and other components are from the custom cooling range and can therefore be easily replaced if necessary.

Aluminium? No thanks!
The radiator comes from the world-renowned NexXxoS ST30 series and has always offered outstanding cooling performance. All water-bearing components are made of pure copper. This includes the end chambers, the cooling channels and of course the cooling fins attached to them. All other components of the Eiswolf GPX-Pro are also made of copper or plastic.
Problems with different metals are thus completely avoided.

Why AiO water cooling?
Good cooling not only increases the life expectancy of a graphics card, but also allows higher boost clock rates. These are dependent on two factors. On the one hand from a general power limit of the graphics card and on the other hand from the temperature. The lower the temperature, the lower the consumption. Thus, the maximum boost clock can be held longer or even permanently.

Technical data GPU cooler:

  • GPU cooler L x W x H: 121,4 x 290 x 38 mm
  • Material cooler bottom: Nickle plated copper
  • Material cooler and pump housing: Acetal
  • Material cooler: Aluminium
  • Power supply logo and pump: 3-Pin Molex
  • Threads: 2 x G1/4"
  • Voltage: 12 VDC
Technical data radiator:
  • Radiator L x W x H: 276 x 124 x 30 mm
  • Material cooling fins: Copper
  • Material Kühlkanäle: Copper
  • Material prechambers: Copper
  • Threads: 2 x G1/4"

Kompatibilität:
ASUS ROG Strix GeForce RTX 2080 Ti OC, ROG-STRIX-RTX2080TI-O11G-GAMING, 11GB GDDR6, 2x HDMI, 2x DP, USB-C (90YV0CC0-M0NM00)
ASUS ROG Strix GeForce RTX 2080 Ti Advanced, ROG-STRIX-RTX2080TI-A11G-GAMING, 11GB GDDR6 (90YV0CC1-M0NM00)
ASUS ROG-STRIX-RTX2080TI-11G-GAMING

Graphics card configurator: Click here!
List of compatibility: Nvidia cooler

Download manual PDF: Alphacool Eiswolf 240 GPX Pro Nvidia Geforce RTX 2080Ti Strix M12 - Black
Download data sheet PDF: Alphacool Eiswolf 240 GPX Pro Nvidia Geforce RTX 2080Ti Strix M12 - Black

Awards and documents
Technical details and videos ... moor
Technical details
Manufacturer: Alphacool
Prefilled: Yes
Radiator Thickness: 30mm
Radiator size: 2x120mm
Hose dimensions: 11/8mm
Videos
Questions & Answers more
Questions & Answers
No question has been asked yet.
Read, write and discuss reviews... more
Reviews
5 Stars:
(0)
4 Stars:
(0)
3 Stars:
(0)
2 Stars:
(0)
1 Stars:
(0)