Your watercooling and modding distributor Your watercooling and modding distributor
Free shipping

Alphacool Eisrohr 16/13mm PETG HardTube 60cm - 4pcs

  • 1012519
  • 18514
  • 4250197185141
  • 0,291 kg

> 250 available in stock

$16.59 *

Prices incl. VAT plus shipping costs

Recommended accessories
Additional charge
Alphacool Acrylic Tubing Pipe Reamer - Heavy Version
1x
Alphacool Acrylic Tubing Pipe Reamer - Heavy Version
$25.94*
Alphacool Acrylic Tubing Pipe Reamer - Light Version
1x
Alphacool Acrylic Tubing Pipe Reamer - Light Version
$11.34*
Alphacool Silicon Bending Insert 100cm for ID 1/2" / 13mm hard tubes - blue
1x
Alphacool Silicon Bending Insert 100cm for ID 1/2" / 13mm hard tubes - blue
$11.34*
Alphacool Silicon Bending Insert 30cm for ID 1/2" / 13mm hard tubes - blue
1x
Alphacool Silicon Bending Insert 30cm for ID 1/2" / 13mm hard tubes - blue
$4.71*
Alphacool Eiskoffer - gloves size 10
1x
Alphacool Eiskoffer - gloves size 10
$10.29*
The HardTube Project is becoming a reality. Alphacool is setting out on a new path and making... more
Product Information

The HardTube Project is becoming a reality. Alphacool is setting out on a new path and making great strides!

Before now, the most common approach to water cooling was to use normal PVC tubes – now Alphacool is offering a new way to configure your water cooling system. The HardTube variants bring more order into your system, which gives off a more structured impression.

The newest are the brass tubes, available in black chrome and chrome, as well as acrylic tubes, carbon, and borosilicate glass. With their fitted connectors and simply-designed functionality, they can be connected to each other with an absolutely tight seal. The PETG-tubes can be bent with the appropriate bending tools in order to fit into any system easily, without needing any additional angled pieces. In order to install the tubes into the system, they need to be sawn to the correct length.

PETG tubes can be bent at lower temperatures than acrylic and are generally more flexible and easier to handle.

Technical Details:

  • Material: PETG
  • Length: 60cm

Scope of delivery:

  • 1x Alphacool Eisrohr 16/13mm PETG 60cm - 4pcs
Notice:

Attention: The manufacturer Mayhems advises that Mayhems fluids, especially the Aurora line of products, have been manufactured and distributed solely for show and modding purposes. These should not be utilized in the system for more than 14 days.

We would also like to advise that Mayhems fluids can damage water cooling products, and using Mayhems fluids can thereby void the warranties offered by the following manufacturers: Koolance, Phobya, Alphacool, Aqua Computer, Watercool.

Damages such as: clogging, corrosion of aluminium radiators, deterioration of glued containers, etc., are a consequence of the use of Mayhems, but will not be reimbursed by Mayhems. Use is therefore at one’s own risk.

Awards and documents
Technical details and videos ... moor
Technical details
Manufacturer: Alphacool
UV - color: Non UV-active
Outer diameter: 16mm (5/8")
Color: Transparent
Max. Operating pressure: 4 Bar (at 20°C)
Service temperature: -20°C bis 60°C
Length: 0,60m
Material: PETG
Inner diameter: 13mm(1/2")
Videos
Questions & Answers more
Questions & Answers
2 Question (s) in other languages.
Click here to display this question (s).
Question from Guest #246715 from 04. April 2017
Hey, habe vor eine kleine custom WaKü mit dem "Eisbaer (Solo)" und diesen tubes mir zu gönnen. Auf der Suche nach den passenden fittings bin ich auf diese hier gestoßen : http://www.aquatuning.de/wasserkuehlung/anschluesse/anschraubtuellen/1610mm/19068/alphacool-ht-16mm-hardtube-anschraubtuelle-g1/4-fuer-plexi-messingrohre-geraendelt-deep-black?c=12405. Meine Frage ist nun, habt ihr für dieses Rohr die passenden fittings in der "Eiszapfen-Revision" ? Wie es scheint sind die die ich ausgewählt habe die "ältere Version (?)". Gruß
Antwort von Aquatuning GmbH vom 04. April 2017
Es gibt zwei Produktlinien bei Alphacool, die HF Reihe und die Eiszapfen. Alle Standard Anschlüsse und fast alle Adapter gibt es auch als Eiszpafen Version. In ihrem Fall suchen sie nach folgendem Artikel: 1011193 oder 1012838 Geben sie die Artikelnummer einfach in unsere Suche ein.
Question from Lorenz R. from 11. November 2017
Sind diese Tubes härter/schwerer zu benden als die EK 16mm?
Antwort von Aquatuning GmbH vom 11. November 2017
Der Schwierigkeitsgrad ist abhängig vom verwendetem Material und Herstellerunabhängig. PETG ist in der Regel am einfachsten zu biegen.
Do you have a question?
Notice: Your question will be publicly visible and could be answered by a member of our community as well as by our support team. You can edit your public username and your email notification settings in your customer account.
Read, write and discuss reviews... more
Reviews
5 Stars:
(1)
4 Stars:
(0)
3 Stars:
(0)
2 Stars:
(0)
1 Stars:
(0)
1 evaluation(s) in other languages.
Click here to show.
Write evaluation
Notice: Your review will be published after it is manually cleared.