- Article no.: 1012517
- Manufacturer no.: 18512
- EAN: 4250197185127
- Weight: 0,328 kg
Delivery: in 2 - 3 days
The HardTube Project is becoming a reality. Alphacool is setting out on a new path and making great strides!
Before now, the most common approach to water cooling was to use normal PVC tubes – now Alphacool is offering a new way to configure your water cooling system. The HardTube variants bring more order into your system, which gives off a more structured impression.
The newest are the brass tubes, available in black chrome and chrome, as well as acrylic tubes, carbon, and borosilicate glass. With their fitted connectors and simply-designed functionality, they can be connected to each other with an absolutely tight seal. The PETG-tubes can be bent with the appropriate bending tools in order to fit into any system easily, without needing any additional angled pieces. In order to install the tubes into the system, they need to be sawn to the correct length.
PETG tubes can be bent at lower temperatures than acrylic and are generally more flexible and easier to handle.
Technical Details:
- Material: PETG
- Length: 80cm
Scope of delivery:
- 1x Alphacool Eisrohr 13/10mm PETG 80cm - 4pcs
Attention: The manufacturer Mayhems advises that Mayhems fluids, especially the Aurora line of products, have been manufactured and distributed solely for show and modding purposes. These should not be utilized in the system for more than 14 days.
We would also like to advise that Mayhems fluids can damage water cooling products, and using Mayhems fluids can thereby void the warranties offered by the following manufacturers: Koolance, Phobya, Alphacool, Aqua Computer, Watercool.
Damages such as: clogging, corrosion of aluminium radiators, deterioration of glued containers, etc., are a consequence of the use of Mayhems, but will not be reimbursed by Mayhems. Use is therefore at one’s own risk.
Manufacturer: | Alphacool |
UV - color: | Non UV-active |
Color: | Transparent |
Max. Operating pressure: | 4 Bar (at 20°C) |
Service temperature: | -20°C bis 60°C |
Outer diameter: | 13mm (1/2") |
Inner diameter: | 10mm (3/8") |
Length: | 0,80m |
Material: | PETG |
Click here to display this question (s).