- Article no.: 1013556
- Manufacturer no.: 18526
- EAN: 4250197185264
- Weight: 0,183 kg
> 50 ready for shipment, delivery time 1-3 days
Prices incl. VAT plus shipping costs
The HardTube Project has become a reality! Alphacool is breaking new ground and setting a new standard!
Up till now, the most commonly used method for connecting water cooling systems was normal PVC tubing - but now, Alphacool is offering another way to set up your system. HardTubes provide more organisation for a system, giving it a distinctly more structured appearance.
The plexiglass tubes can be fitted to a system easily with the right bending tools, without requiring extra angled pieces. In order to install the tubes into a system, they must be cut to the correct length.
The following variants are available
- HardTube 13/10mm Plexi Clear 20cm, 40cm, 60cm, and 80cm
- HardTube 16/12mm Plexi Clear 20cm, 40cm, 60cm, and 80cm
- (now available as a 4-pack)
Components can be attached to the tubes, cut to the correct length, with a little effort.
Scope of delivery
- Alphacool HardTube 12/10mm Plexi (PMMA) Clear 60cm - 4 pcs.
Please note: not compatible with Monsoon fittings
Attention: The manufacturer Mayhems advises that Mayhems fluids, especially the Aurora line of products, have been manufactured and distributed solely for show and modding purposes. These should not be utilized in the system for more than 14 days.
We would also like to advise that Mayhems fluids can damage water cooling products, and using Mayhems fluids can thereby void the warranties offered by the following manufacturers: Koolance, Phobya, Alphacool, Aqua Computer, Watercool.
Damages such as: clogging, corrosion of aluminium radiators, deterioration of glued containers, etc., are a consequence of the use of Mayhems, but will not be reimbursed by Mayhems. Use is therefore at one’s own risk.
|UV - color:||Non UV-active|
|Max. Operating pressure:||4 Bar (at 20°C)|
|Service temperature:||-20°C bis 60°C|
|Inner diameter:||10mm (3/8")|
|Outer diameter:||12mm (1/2")|