- Article no.: 1011143
- Manufacturer no.: 18443
- EAN: 4250197184434
- Weight: 0,36 kg
Delivery: in 4 - 5 months
Prices incl. VAT plus shipping costs
The HardTube project becomes a reality. Alphacool takes a completely new way and clearly sets!
The method most commonly used previously for water cooling systems is normal PVC hoses - now Alphacool offers another approach to water cooling. The Alphacool HardTube again brings more tidiness into the system which makes a much more structured impression.
Brand new plexi tubes with the Alphacool HT connectors make installation very simple, they connect completely sealed together. The plexi tube can be adapt to the system with the appropriate bending tool without needing to use additional angles.
The following options are available:
- HardTube 13/10mm plexi Clear 20cm, 40cm, 60cm and 80cm
- HardTube 16/13mm plexi Clear 20cm, 40cm, 60cm and 80cm
(also available in a pack of 4)
Note: Due to the made-to-fit pipes, the connections must be plugged straight with a little effort.
Scope of delivery:
- Alphacool HardTube 16/13mm plexi clear 60cm - 4pcs
Attention: Not compatible with Monsoon fittings.
Attention: The manufacturer Mayhems advises that Mayhems fluids, especially the Aurora line of products, have been manufactured and distributed solely for show and modding purposes. These should not be utilized in the system for more than 14 days.
We would also like to advise that Mayhems fluids can damage water cooling products, and using Mayhems fluids can thereby void the warranties offered by the following manufacturers: Koolance, Phobya, Alphacool, Aqua Computer, Watercool.
Damages such as: clogging, corrosion of aluminium radiators, deterioration of glued containers, etc., are a consequence of the use of Mayhems, but will not be reimbursed by Mayhems. Use is therefore at one’s own risk.
|UV - color:||Non UV-active|
|Outer diameter:||16mm (5/8")|
|Max. Operating pressure:||4 Bar (at 20°C)|
|Service temperature:||-20°C bis 60°C|