Alphacool's new quick couplers with the name "Eiszapfen" are the next block in the "Eis" series. High quality and impressive features makes any watercooling system back to a piece of high-quality and practical!
A quick coupling is used everywhere where expandability, flexibility and cleanness play an important role. These compact couplings have a 1/4 "thread on both sides with which they are compatible with all standard connections.
By pulling down the outer ring these couplings can be disconnected. Both sides close immediately completely tight so that no water can escape. Thanks to the special N.D.S.L. Technology (no drip, no splash, no leak) a leak, drip or splash out of the water on opening the lock is excluded. By assembling again, both sides must click into each other audibly and shut themselves tightly by a double O-ring, which is simply compressed when plugged together.
Likewise, the mechanism was designed for durability to ensure a secure connection even years.
Many quick couplings usually also affect the flow rate. But Alphacool has found a way to resolve this issue. A high flow rate is maintained at these quick couplings!
Alphacools quick couplers are available in two finishes. In deep black and fully chromed these add seamlessly on every system.
- Dimensions (L x D): 64,6 x 23,9mm
- Material: Brass
- Colour: Chrome
- Thread: 2x 1/4" internal thread
Scope of Delivery:
- 1x Alphacool Eiszapfen quick release connector kit G1/4 inner thread - Chrome
The quick couplings should not be used permanently in dry condition, since the O-rings may be too much strain and tightness is no longer guaranteed.
Attention: The manufacturer Mayhems advises that Mayhems fluids, especially the Aurora line of products, have been manufactured and distributed solely for show and modding purposes. These should not be utilized in the system for more than 14 days.
We would also like to advise that Mayhems fluids can damage water cooling products, and using Mayhems fluids can thereby void the warranties offered by the following manufacturers: Koolance, Phobya, Alphacool, Aqua Computer, Watercool.
Damages such as: clogging, corrosion of aluminium radiators, deterioration of glued containers, etc., are a consequence of the use of Mayhems, but will not be reimbursed by Mayhems. Use is therefore at one’s own risk.
|1. Side:||G1/4" inner thread|
|2. Side:||G1/4" inner thread|
|Compatibility:||Soft tubing (PVC, Silikon, Neoprene)|
Click here to show.
Of the three ordered, one ended up with a defective rubber seal. O-ring where to buy such a diameter is not clear! And another couple when uncoupling seizes the fitting male. It turns out that only one of the three fully and flawlessly works, in my case, the failure of these fittings was 60%.
I would like to see the possibility of buying additional O-ring in the recommendation for this product and the specified size of this compactor, so that you can find a similar one if you lose the factory one ....
That fitting that works, suits! Everything is tight, everything is as it should, I will order more, since there is a need for fast connections. I hope next time lucky for the best quality.