Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors!
Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system.
A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable!
The connecting nut’s slanted corners allow the O-ring to be pressed firmly against the HardTube, ensuring it sits even more securely than before. This allows for greater safety in transport.
Anyone looking for colourful options has them: the O-rings in the shipment come in three colours. With the available UV-light option, these will even light up in the corresponding colour.
Model: HardTube Socket 16mm
This connector has a ¼” external screw thread on one side. The other side fits HardTubes with an external diameter of 16mm.
- Material: Brass
- Colour: Deep Black
- Diameter: 21mm
- Height: 18mm
Scope of Delivery:
- 1x Alphacool Eiszapfen 16mm HardTube compression fitting G1/4 for plexi- brass tubes (rigid or hard tubes) - knurled - Deep Black
Attention: The manufacturer Mayhems advises that Mayhems fluids, especially the Aurora line of products, have been manufactured and distributed solely for show and modding purposes. These should not be utilized in the system for more than 14 days.
We would also like to advise that Mayhems fluids can damage water cooling products, and using Mayhems fluids can thereby void the warranties offered by the following manufacturers: Koolance, Phobya, Alphacool, Aqua Computer, Watercool.
Damages such as: clogging, corrosion of aluminium radiators, deterioration of glued containers, etc., are a consequence of the use of Mayhems, but will not be reimbursed by Mayhems. Use is therefore at one’s own risk.
|2. Side:||G1/4" outer thread|
|Compatibility:||Acrylic tubing, Brass Tube|
|1. Side:||16/10mm (ID 3/8" OD 5/8")|
Click here to display this question (s).
Click here to show.
Alphacool Röhren sind sehr schwer zu montieren ein fitting wurde mit einer falschen und ein weiterer mit einer fehlenden Dichtung geliefert. Besitze insgesamt 10 stk. Da finde ich die Fehlerquote schon recht hoch.
Verarbeitung und Optik finde ich sonst top.