Our popular fittings are now available in a completely new design!
High-quality robust barbed fitting with cylindrical thread. Suitable for PVC, PU, PA, PE or silicone hoses with an inner diameter of 10mm. With integrated 1/2" Perbunan(r) O-Ring seal.
Material: Copper plated brass
Hose size: 13mm inner diameter
Thread size: G1/4"
Extent of delivery:
Copper plated barbed fitting with durable seal
Note for watercooling beginners: The connectors for hoses(7/16", 3/8",1/2") are provided with measurements in mm in our shop. These can differ by +-1mm, which is no problem as hose clamps have to be used for installation. If the hose is to be mounted without a clamp, a larger fitting should be chosen. With some fittings that tend to be larger, it is possible though that a hose with an inner diameter of 13mm actually does seal without a hose clamp.
10mm (3/8") hose clamp: up to 8mm none, from 10mm up required
10mm (7/16") hose clamp: up to 8mm none, from 10mm up required
12mm (1/2") hose clamp: up to 11mm none, from 12mm up required
13mm (1/2") hose clamp: up to 11mm none, from 13mm up required
|Compatibility:||Soft tubing (PVC, Silikon, Neoprene), Stiff tubing (PUR)|
|2. Side:||G1/4" outer thread|
|1. Side:||Barbed fittings 12 & 13mm (1/2")|
Click here to show.