- Article no.: 63032
- Manufacturer no.:
- EAN: 4049469031916
- Weight: 0,018 kg
> 50 available in stock
Prices incl. VAT plus shipping costs
12mm barb fitting made from nickel coated brass for PVC, PU, PA, silicone or PE hoses with an inner diameter of 11-13mm. G1/8" outer thread. The hose has to be fixated with a hose clamp or a zip tie. Inner diameter of fitting: 9,4mm.
Note for watercooling beginners:
The connectors for imperial hoses(7/16", 3/8", ½") are provided with measurements in mm in our shop. These can differ by +-1mm, which is no problem as hose clamps have to be used for installation. If the hose is to be mounted without a clamp, a larger fitting should be chosen. With some fittings that tend to be larger, it is possible though that a hose with an inner diameter of 13mm actually does seal without a hose clamp.
10mm (3/8") hose clamp: up to 8mm none, from 10mm up required
10mm (7/16") hose clamp: up to 8mm none, from 10mm up required
12mm (1/2") hose clamp: up to 11mm none, from 12mm up required
13mm (1/2") hose clamp: up to 11mm none, from 13mm up required
|Compatibility:||Soft tubing (PVC, Silikon, Neoprene), Stiff tubing (PUR)|
|2. Side:||1x G1/8" outer thread|
|1. Side:||Barbed fittings 12 & 13mm (1/2")|