With the new compression fittings from Alphacool for Plexi, brass, borosilicate glass, or carbon tubes, Alphacool is taking a further step towards perfection and quality.
The first two colours, chrome and deep black, offer great variety. The fully coordinated product series allows each system to shine in its own right, and individuality has no limits when paired with the Alphacool Plexi and brass tubes!
The colouring is bound fast to the brass surface with a new chromatization process. This ensures the longevity of the intense colour and prevents chipping of the chrome layer. An Alphacool logo on the connector emphasizes the distinctive nature of this product once again.
The Function of this Connector is:
This connector is used to connect two 16mm Plexi, brass, borosilicate glass, or carbon tubes at a 90° angle.
- Width: 41.5mm
- Height: 41.5mm
- Material: brass, chromatized
- Colour: deep black
Scope of Delivery:
- 1 x Alphacool HT 13mm HardTube Compression Fitting 90° L-Connector for Plexi, brass tubes - knurled - Deep black
Attention: The manufacturer Mayhems advises that Mayhems fluids, especially the Aurora line of products, have been manufactured and distributed solely for show and modding purposes. These should not be utilized in the system for more than 14 days.
We would also like to advise that Mayhems fluids can damage water cooling products, and using Mayhems fluids can thereby void the warranties offered by the following manufacturers: Koolance, Phobya, Alphacool, Aqua Computer, Watercool.
Damages such as: clogging, corrosion of aluminium radiators, deterioration of glued containers, etc., are a consequence of the use of Mayhems, but will not be reimbursed by Mayhems. Use is therefore at one’s own risk.
|Specification:||Shape: 90° angled|
|Thread length:||Not specified|
|1. Side:||16/13mm (ID 1/2" OD 5/8")|
|Compatibility:||Acrylic tubing, Brass Tube|
|2. Side:||16/13mm (ID 1/2" OD 5/8")|
Click here to display this question (s).