Your watercooling and modding distributor Your watercooling and modding distributor

Alphacool Eisbecher 150mm Acetal reservoir

  • 1011214
  • 15191
  • 4250197151917
  • 0,637 kg

> 25 available in stock

$38.65 *

Prices incl. VAT plus shipping costs

Empfohlenes Zubehör
Additional charge
Alphacool Aurora LED Ring 60mm - red
1x
Alphacool Aurora LED Ring 60mm - red
$16.59*
Alphacool Aurora LED Ring 60mm - white
1x
Alphacool Aurora LED Ring 60mm - white
$15.54*
Alphacool Aurora LED Ring 60mm - uv
1x
Alphacool Aurora LED Ring 60mm - uv
$16.59*
Alphacool Aurora LED Ring 60mm - blue
1x
Alphacool Aurora LED Ring 60mm - blue
$16.59*
Alphacool Aurora LED Ring 60mm - green
1x
Alphacool Aurora LED Ring 60mm - green
$16.59*
Alphacool 120/140mm mounting bracket for Alphacool Eisbecher - 2 pcs
1x
Alphacool 120/140mm mounting bracket for Alphacool Eisbecher - 2 pcs
$9.24*
Alphacool Aurora LED Ring 60mm - RGB
1x
Alphacool Aurora LED Ring 60mm - RGB
$22.89*
Technical details and videos ... moor
Technical details
Color: Transparent
Connector: G1/4" inner thread
Dimensions: 60 x 60 x 150 mmm
Fillport: G1/4" inner thread
LED hole: Available (for 5mm LEDs)
Manufacturer: Alphacool
Material: Plexi, POM
Model of reservoir: Tubing - reservoirs 60mm
Number of connections: 6
Preinstalled pump: No
Pump compatibility: For flow pumps
Videos

Reinvent the tube   The Eisbecher Series consist of 20 different reservoirs that differ...more
Product Information


Reinvent the tube 

The Eisbecher Series consist of 20 different reservoirs that differ between usage, measurement and appearance. There are ten reservoirs within this series that consist of 99% plexi - totally unique! But the main difference between these reservoirs is within the functionality of the different sockets.

Constituents

Bubble Down
It is placed at the bottom of the reservoir to prevent turbulences that could lead air into the watercircle. 

Lighttower Standpipe
The "Lighttower" effect creates an astounding visual experience within every watercooling system. The Eisbecher supports this in two different ways: fluid coming from the bottom and coming from the top. The water is being led through the standpipe to the bottom or to the top where it splashes out of eight evenly distributed holes at the end of the pipe to the inner wall of the reservoir. This special watergame is the so called "Lighttower" effect. 

Stand
The known feet from the "Eisdecken" find its very way even to the Eisbecher and sustain every combination with a solid stand.


Mountings
There are two mountings placed above and under the pipe for fastening the lot in the casing. The holes in this mounting have a spacing of a 120/140 cooling fan.You can reduce the width of the mountings up to the width of the reservoir and there are three M4 threads availaible per mounting for fastening if you would rather not mount the reservoir at the fan space. These mountings are easily removeable especially when not being used. You will find these mountings on all 20 reservoirs.

Lighting module
The lighting modules consist of plexi and enable the lighting with a 5mm LED. These modules can be installed into all 1/4" holes. They are being used in the lid and occasionally in the socket of the reservoir. This facilitates a unique way to your personalised lighting effects.

Material
All models of the reservoir are availaible in acetal and plexi. So there is something for everone.

Measurements
All reservoirs are availaible in two different sizes: the 150mm version and the 10cm bigger 250mm version. The smaller reservoir comes with only one standpipe coming from the bottom because of its size and the bigger reservoir comes with two: one coming from the top and the other one from the bottom.











 

The Eisbecher

There are two additional versions for everyone that would rather operate the pump seperately. The Bubble Down and depending on the size one or two standpipes that fascilitate the "Lighttower" effect and two lighting modules one from the top and the other one from the bottom are being used here. And there are additional three LED holes for the plexi version to maximize the lighting power. The openings to fill or drain the liquid are doubled here: One at the side and one at the bottom.

Included in delivery:

  • 8x M4x8mm screw
  • 4x M4 nut
  • 2x G1/4" locking screw
  • 1x allen key 2,5mm

 

Measurements 150mm Version:
Measurements with mounting (LxWxD): 151 x 136 x 79,5mm
Measurements without mounting (LxW): 151 x 60mm

Diameter of the Plexitube: 60mm

Notice:

In order to use the intake from the top, a G1/4” extension piece is necessary (article 1011183-1011186), since the screw thread is embedded a few mm into the lid and many compression fittings will not be able to be screwed in. 

Awards
Questions & Answers more
Questions & Answers
Question from Axel J. from 02. February 2016
Ich wollte mal wissen, ob die LED`s dabei sind, oder ob man sie extra bestellen muss?
Antwort von Aquatuning GmbH vom 02. February 2016
Die werden extra bestellt :)
Antwort von Daniel N. vom 03. March 2016
Kann man den auch als standalone agb hernehmen?
Question from Lasse K. from 04. April 2016
Kann man auch oben das Wasser in den AGB fließen lassen? Oder muss man das Wasser von unten kommen lassen?
Antwort von Aquatuning GmbH vom 04. April 2016
Also die Öffnung oben ist eigentlich nur zur Befüllung oder für das Beleuchtungsmodul gedacht. Am besten ist es die vorgegebenen Nutzungsmöglichkeiten zu nutzen. Also unten rein und auch raus.
Question from Philip H. from 07. July 2016
Guten Abend, der Artikel: 1011191 müsste doch an den beiden unteren Stellen passen?
Antwort von Aquatuning GmbH vom 07. July 2016
Passt ohne weiteres :)
Question from Guest #12551 from 10. October 2016
Benötige ich für diesen AGB keinen Filterschwamm? Meine Laing DDC1-T (Art.Nr 49064) schäumt das Wasser im AGB regelrecht auf. Ich besorg mir noch einen Adapter (Art.Nr 81001) und schließe die Pumpe an der Lüftersteuerung an. Diese macht pro Kanal bis 12W, also sollte da kein Problem mehr bestehen.
Antwort von Aquatuning GmbH vom 10. October 2016
Dafür wird eigentlich kein Schwamm benötigt, denn das Wasser geht schön an die Wand und dort dann runter. Gut, der AGB ist nicht besonders hoch, somit kann es bei sehr wenig Wiederstand im System schon dazu kommen, dass die Pumpe zuviel power hat und die Luftbläschen wieder ins Sxstem aufgenommen werden. Die Lösung mit der Lüftersteuerung ist perfekt für solche zwecke. Phobya bietet da schon für relativ wenig Geld top Leistung, zb. die TPC Steuerung (70222).
Question from A.W. from 10. October 2016
Kann ich diesen AGB auch Horizontal (also quasi liegend) in einem Gehäuse montieren? also oben an der Decke des Gehäuses mit der Pumpe unten am Boden? Bilden sich dadurch eh keine zusätzlichen Luftblasen? Wenn das ginge, befüllen würde ich ihn dann über den 2ten Einlass unten oder?
Antwort von Aquatuning GmbH vom 10. October 2016
Es ist möglich, ist aber nicht für diesen Einsatz entworfen worden. Wichtig hierbei wäre, dass der Abfluss aus dem Behälter möglichst tief liegt.

Do you have a question?

Hinweis: Ihre Frage wird öffentlich einsehbar sein und kann - neben unserem Support - auch durch ein Mitglied unserer community beantwortet werden. Sie können Ihren öffentlich sichtbaren Namen und Ihre Email Benachrichtigungen in Ihrem Kundenkonto konfigurieren.
Read, write and discuss reviews...more
Reviews
5 Sterne:
(0)
4 Sterne:
(0)
3 Sterne:
(0)
2 Sterne:
(0)
1 Sterne:
(0)

Bundle

Bundle