|Connector:||G1/4" inner thread|
|Dimensions:||50 x 50 x 250mm|
|Fillport:||G1/4" inner thread|
|LED hole:||Not available|
|Material:||POM, Plexi, Brass copper plated|
|Model of reservoir:||Tubing - reservoirs 50mm|
|Number of connections:||3|
|Pump compatibility:||For flow pumps|
The Alphacool Cape Coolplex reservoirs have been well-known and popular on the water cooling market for years!
But even such great products can sometimes use an update to fulfill even the most recent demands. Hence we at Alphacool have let the old series run out and now introduce the new series with POM end pieces as “LT” and now even with solid metal end pieces as the “Copper Edition”. Of course the tubes are made from high-grade Plexiglas which has proven itself with safe operation in many cooling systems for many years!
The changes made are subtle but very well thought through:
Besides the new materials and surface finishes the top piece of the reservoirs is now equipped with an additional thread, making them great for installation of a Fillport. Additionally the reservoir can now also be installed horizontally! The riser tube is now removable for applications where the top of the reservoir is used as an inlet.
A nice side effect: Now even more lighting modules can be installed for beautiful lighting effects.
To round off the new concept the screw plugs on all versions now have an elegant polished copper surface finish!
For maximum compatibility all threads are G1/4” in size. The proven transparent mounts are now also included again for almost invisible mounting. Make your PC a piece of art with the new Cape Coolplex reservoirs!
Alphacool recommended for correct operation of the water cooling distilled water!
Material: POM, Plexi
Connection threads: G1/4"
Extent of delivery:
2x Mounting clamps
2 x G ¼" Screw plugs
Please note: For mounting additional screws are needed. We recommend ordering item No. 46023 with this reservoir.
Do you have a question?
Sehr gut verarbeitet und ein Top Preis - Leistungsverhältniss
unten sind die löcher leider so nah bei einander das man keine 2 16/10mm anschlüssen (monsoon) nebeneinander anbringen kann. deswegen habe ich ihn kopfüber montiert, also so das unten nur 1 loch ist und oben die 3, so kann ich von der cpu direkt oben rein und hatte noch löcher oben frei zum gefüllen.