|Approved fluids:||Water, Water/ glycol mixture|
|Dimensions:||120 x 22 x 17 mm|
|Max. Discharge head:||2,6m, Good (2 to 4m)|
|Max. Flow:||420l/h, Standard (smaller than 500l/h)|
|Max. System temperature:||60° C|
|Power connector:||3Pin Molex|
|Water inlet:||G1/4" inner thread|
|Water outlet:||G1/4" inner thread|
The compact dimensions allow a whole new horizon of possibilities. Especially in smaller cases this pump is perfect. Thanks to the low power consumption a direct connection to the PSU is not necessary, the pump can also be connected to a fan controller or Mainboard fan connector (Please always check the capabilities of the connectors!). The pump is equipped with G1/4" inlet and outlet connection threads which makes for maximum compatibility with virtually any system! The included mount and mounting screws with rubber washer allows safe and decoupled mounting of the pump.
Warning: Please note that the Koolance guarantee only remains valid if this product is operated with distilled water (pure water) or with water additives and / or finished mixtures of the following manufacturers: Koolance, Alphacool, Aquacomputer, Innovatek and Phobya. If other liquids are used the warranty may no longer be given.
Pump performance: 420 l/h (1.85 gal/min)
Pressure head: 2.6m (8.53ft)
Motor: Brushless DC
Dimensions pump (LxD): 73x50mm
Cable length: 29mm
Connection thread size: 1/4"
Dimensions mount (LxWxH): 120x22x17mm
Hole spacing: 66-111mm
Power consumption: Max. 9.6W
Nominal voltage: 6 to 12V DC
Maximum temperature: 60°C (140°F)
Connector: 3-Pin with rpm lead
Thread size: G1/4"
Extent of delivery:
1x Koolance pump PMP-300
Do you have a question?
Guter Durchfluss, relativ leise und solide Halterung und schneller Einbau. Einziges Manko: Die Gewinde an die die G1/4 Anschlüsse anzubringen sind, sind relativ kurz. Meine Steck-Anschlüsse musste ich kürzen dass sie passten.