Your watercooling and modding distributor Your watercooling and modding distributor

Alphacool Eisbaer 240 CPU - black

> 250 available in stock

$120.79 *

Prices incl. VAT plus shipping costs

Empfohlenes Zubehör
Additional charge
Alphacool Eisbaer Intel mounting kit socket 2011-3 narrow ILM
1x
Alphacool Eisbaer Intel mounting kit socket 2011-3 narrow ILM
$5.98*
Alphacool Eisbaer Quick-Connect Extension Kit
1x
Alphacool Eisbaer Quick-Connect Extension Kit
$19.74*
Alphacool NexXxos Eiswolf / Eisbaer Ready ST30 Full Copper 240mm radiator
1x
Alphacool NexXxos Eiswolf / Eisbaer Ready ST30 Full Copper 240mm radiator
$66.16*
Alphacool NexXxos Eiswolf / Eisbaer Ready ST30 Full Copper 280mm Radiator
1x
Alphacool NexXxos Eiswolf / Eisbaer Ready ST30 Full Copper 280mm Radiator
$80.88*
Alphacool NexXxos Eiswolf / Eisbaer Ready ST30 Full Copper 360mm Radiator
1x
Alphacool NexXxos Eiswolf / Eisbaer Ready ST30 Full Copper 360mm Radiator
$84.03*
Technical details and videos ... moor
Technical details
CPU Performance: Excellent
Hose dimensions: 11/8mm
Manufacturer: Alphacool
Prefilled: Yes
Radiator Thickness: 30mm
Radiator size: 2x120mm
Socket: AMD 604/771/G34, AMD 939/AM2/AM2 /AM3/AM3 /FM1/FM2, Intel 1150/1151/1155/1156, Intel 1366, Intel 2011, Intel 775
Videos
With the “Eisbaer”, Alphacool is fundamentally revolutionizing the AIO cooler market. Where...more
Product Information

With the “Eisbaer”, Alphacool is fundamentally revolutionizing the AIO cooler market. Where traditional AIO CPU-coolers are disposable products which are neither upgradeable nor refillable, the Alphacool “Eisbaer” is modularly built and can be upgraded, rebuilt or refilled at any time. This means that the “Eisbaer” is not only an AIO, but also fully built on classic water cooling components. That means it is quieter and more powerful than the average AIO solution.

The individual components:

Radiator
Alphacool depends on a radiator made of pure copper. The base of the radiator is the popular Alphacool NexXxoS series, which is well-loved around the world. The pure copper construction raises the cooling performance enormously compared to the usual aluminium radiators used in classic AIOs. The slight thickness of the fins ensures enormous cooling power in fans with low rotational speed. This ensures that the performance of the “Eisbaer” when adjusting the fans down decreases much more slowly than in radiators with higher fin thickness.

Hoses
The flexible PVC hoses make installing the “Eisbaer” easy. These hoses are easier to arrange and move into the right position. So the hoses don’t bend and stop the flow of the water, both hoses have been fitted with anti-kink springs. The 11/8 mm size is also a standard in the water cooling field, alongside the 13/10 and 16/10.

Quick-lock closure
The “Eisbaer” was designed with expandability directly in mind. This is why you’ll find a quick-lock closure on one of the hoses. This quick-lock mechanism is compatible with Alphacool HF quick-lock closures (1010383, 1010394, 1010395, 1010442), with which the circuit can easily be expanded to include anything from a radiator to a graphics card cooler. Furthermore, the “Eisbaer” is compatible with the upcoming Alphacool GPX-Pro graphics card AIO, which will use identical quick-lock closures.

Fans
The “Eiswind” fans were developed specially for radiators and generate a high static pressure in order to push cool air through the fan blades. Both fans can be regulated with PWM to anywhere in an enormous range from 550 to 1700 RPM. A PWM Y-adapter is included with the “Eisbaer” so that both fans can be controlled by the motherboard or a separate fan control with a PWM connection.

Connectors
All connectors are based on the classic G1/4 inch thread, the standard thread in the water cooling field. This way, all attachments can be switched out for others any time as desired. This also means that, for example, you could later decide to switch to thicker hoses or even HardTubes and set your system uniquely apart.

All these features make the “Eisbaer” cooler into something extraordinary. Its enhanced appearance from the illuminated logo and the illuminated reservoir, which also contains the pump, lets the interior of your PC shine in a whole new way. The soft-touch surface of the pump case is a further visual highlight. 
With the “Eisbaer”, you get an all-around perfect product that is not only extremely high-powered but also works very quietly.

Pumps
The basis of the pumps is the Alphacool DC-LT Ceramic Ultra Low Noise, also available separately. The pump runs extremely quietly and can be regulated to between 7 and 12V. It can also be regulated through the motherboard. If the “Eisbaer” is being run alone, the 7V setting will still have next to no performance loss, as shown in diverse test results. The insulated pump case further perfects the noise generation and ensures that vibrations are almost completely absorbed.
The smooth and shiny polished copper base of the cooler ensures optimal heat absorption and can relay the heat over the fine slit structure of the cooler to the water quickly and efficiently.

Technical Details:

Pump (Alphacool DC-LT 2600 Ultra low noise Ceramic):

  • Speed: 2600 RPM
  • Voltage: 7-13.5V DC
  • Power consumption: 4W
  • Maximum flow rate: 70L/h
  • Maximum head: 0.85m

Fan (Eiswind 12):

  • Bearing: sleeve bearing
  • Voltage: 12V
  • Power connection: 4-pin PWM
  • Rated speed: 550-1700 (+/- 10%)
  • Airflow: 63.85 cfm / 108 m3/h
  • Static pressure: 1.66 mmH20
  • Volume: 29 dB(A)

Scope of Delivery:

  • 1x Alphacool Eisbaer 240 CPU - Black
  • 2x Eiswind Fan
  • 1x Intel Backplate
  • 1x Intel bracket
  • 1x AMD bracket
  • PWM Adapter
  • Mounting material
  • 1x Thermal paste

 Technical drawing 

Manual

Notice for expansion:

Please take care not to mix up the IN and OUT ports. On the “Eisbaer”, the “outlet” is marked in “red” and the “inlet” in “blue”. On the components to be connected, it is the opposite. The coupling with the “blue” marking denotes the “outlet” and the coupling with the “red” marking is the “inlet”. This is important as in many coolers the flow direction is crucial for optimal cooling performance.

Questions & Answers more
Questions & Answers
Question from Guest #256892 from 09. September 2016
Hallo, Ist die Pumpe im Eisbaer stark genug um mit ihr den Kreißlauf zu erweitern auf eine Grafikkarte und einen zusätzlichen 240er Radiator?
Antwort von Aquatuning GmbH vom 09. September 2016
Für diese erweiterung ist es ratsam, noch eine zweite Pumpe mit ins System zu nehmen. Da wäre die Pumpe überfordert.
Antwort von Mike S. vom 11. November 2016
Habe einen Intel(R) Core(TM) i7 2600CPU @ 3,40 GHz passt da der Kühler auch.
Question from Phillip J. from 10. October 2016
Ich habe mir dieses Set gekauft und bin nicht mit den Schläuchen zufrieden, ich möchte diese ersetzen, ist das ohne weitere möglich mit folgenden Teilen? http://www.aquatuning.de/wasserkuehlung/schlaeuche/schlaeuche/15408/alphacool-schlauch-alphatube-hf-13/10-3/8-id-klar http://www.aquatuning.de/wasserkuehlung/anschluesse/anschraubtuellen/1310mm/20674/alphacool-eiszapfen-13/10mm-anschraubtuelle-g1/4-deep-black http://www.aquatuning.de/wasserkuehlung/wasserzusaetze/fertiggemisch/9213/aquacomputer-double-protect-ultra-blau-1000ml Die Schnellkupplung soll auch raus!
Antwort von Aquatuning GmbH vom 10. October 2016
Ja, dieser Autausch ist ohne Probleme möglich.
Question from mikel p. from 10. October 2016
work in intel 2011-V3?
Antwort von Aquatuning GmbH vom 10. October 2016
Yes, it works.
Question from Helmut W. from 10. October 2016
von welchem hersteller und typ ist der verbaute schlauch?
Antwort von Aquatuning GmbH vom 10. October 2016
Diese Information haben wir leider nicht vorliegen. Sie können jedoch gerne bei Alphacool direkt anfragen.
Question from Helmut W. from 10. October 2016
wo findet man identische 1/4 11/8er anschlüsse?
Antwort von Aquatuning GmbH vom 10. October 2016
Sie können einmal hier unter dem folgenden Link schauen: http://www.aquatuning.de/wasserkuehlung/anschluesse/anschraubtuellen/118mm/black-matt/13961/11/8mm-8x1-5mm-anschraubtuelle-g1/4-geraendelt-black-matt
Question from Guest #256039 from 11. November 2016
Welche Kühlflüssigkeit ist im Eisbär, was muss ich nehmen wenn ich nachfüllen will nach Flüssigkeitsverlust?
Antwort von Aquatuning GmbH vom 11. November 2016
Sie können folgenden Artikel verwenden: http://www.aquatuning.de/wasserkuehlung/wasserzusaetze/fertiggemisch/10969/phobya-zuperzero-pure-water-1000ml?c=370

Do you have a question?

Hinweis: Ihre Frage wird öffentlich einsehbar sein und kann - neben unserem Support - auch durch ein Mitglied unserer community beantwortet werden. Sie können Ihren öffentlich sichtbaren Namen und Ihre Email Benachrichtigungen in Ihrem Kundenkonto konfigurieren.
Read, write and discuss reviews...more
Reviews
5 Sterne:
(0)
4 Sterne:
(0)
3 Sterne:
(0)
2 Sterne:
(0)
1 Sterne:
(0)
liquid metal thermal compoand Paste LM (1g) liquid metal thermal compoand Paste LM (1g)
Content 1 g ($6,925.00 * / 1000 g)
$6.93 *