More power per channel for the Heatmaster 2!
To allow connection of even more powerful pumps or more fans to one channel, this cooler was developed to allow integration into the water cooling loop. This increases the output power of an individual channel from 18W to 38W. This allows maximum utilization of the potential of the channels.
Important: The total power draw from all channels must not exceed 75W.
The increased cooling performance and easy installation with the included 1mm thick thermal pad and mounting material help lift the Heatmaster2 to a new performance level. With a copper cooling plate and Acetal top plate both cooling performance and looks are perfect! The G1/4” connection threads allow maximum fitting compatibility and make for quick integration into any cooling loop.
Material: Copper, Acetal
Colour: Copper, black
Dimensions (L x W x H): 86 x 15 x 13mm
Connection thread size: ¼”
Extent of delivery:
1x Alphacool Heatmaster 2 water block
2x M3x10 screw
2x Washer 3,2x0,5 PA
2x Spacer 3,2x2 PA
1x Thermal pad 30x30x1mm
1x Allen key suitable for the included screws
Send it and get one cooler for free
Please confirm the compability of your graphics card here. If you have a graphics card that has no suitable waterblock solution, Alphacool offers a custom cooler service to make a cooler for your card. After you have submitted your video card Alphacool create a 3D scan. After a short time you will get your graphics card back and only need to wait for delivery with the new, free cooler. For more information, click here.
Click here to show.
Könnte etwas mehr Kupfer beinhalten. Montage etwas frickelig. Unbedingt die Pads die beiliegen benutzen. Mit Wärmeleitpaste funktioniert es nicht!